INTROUDCTION
FWBU2EIDE525D-1 is ideally suited for tailgate interface applications for ATAPI ODD (Optical Disk Drive)
- CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, tape drive, and hard disk drive.
It allows IDE drives (Master and Slave) to be connected to a FireWire (IEEE 1394) or USB serial bus in a plug-and-play fashion.
FWBU2EIDE525D-1 provides the perfect solution for data backup and transferring of data between computers using IDE (ATA/ATAPI) devices.
FWBU2EIDE525D-1 combines two key components:
1). FireWire800 (IEEE 1394b) & USB 2.0 ComBo to IDE (ATA/ATAPI) Bridge Board:
2). CF-7021 (Dual 5.25" Bays Enclosure)
1). FireWire800 (IEEE 1394b) & USB 2.0 ComBo to IDE (ATA/ATAPI) Bridge Board:
- USB 2.0 and FireWire 800 (1394b) arbitration: Auto-Switch by detecting USB bus power.
- USB 2.0 Interface: One mini B-5pin USB connector
- USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12
Mbit)
- USB Bus Power: Self Powered Mode Operation
- USB 2.0 high speed LED
- FireWire ports: One FireWire-6pin and Two Biligual-9pin
- 1394 Bus Transfer Rate: 100/200/400/800 Mbps
- IDE Access LED
- IDE Interface: Male IDC 2X20 Connector
- Both ATA and ATAPI devices are supported using the same firmware.
- Complies with T13's ATA/ATAPI-7 Draft Specification:
- PIO Mode 0 ~ 4
- DMA Mode 0 ~ 2
- Ultra DMA Mode 0 ~ 4
- Ultra DMA Mode 5, 6 (FireWire
only)
- Supports 48-bit LBA for large hard drives (>128GB).
2). CF-7021 (Dual 5.25" Bays Enclosure)
- Provide two 5.25" device bay
- The inner metal mounting bracket provide the screw hole for 5.25" devices.
- Provide one RCA Jack
- Power indicator LED, HDD access LED and USB 2.0 high speed LED
- Provide Power Switch on the front panel.
- Built-in 80W power supply/Universal auto-switching 90-240V AC
- Built-in 80x80 mm cooling fan
HARDWARE
REQUIREMENTS
- Desktop PC: with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to PCI Host Adapter equipped with a external FireWire (1394b or 1394a) port.
- Desktop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
- Laptop PC: with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to CardBus PC Card equipped with a external FireWire (1394b or 1394a) port.
- Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
OPERATING
SYSTEM REQUIREMENTS:
- Windows 98
- Windows SE
- Windows ME
- Windows 2000
- Windows XP
- Apple Mac OS X or
higher
DRIVER
REQUIREMENTS:
- FireWire:
- No driver installation for Windows 98SE, ME, 2000, XP and Mac OS
- USB:
- No driver installation for Windows ME, 2000, XP and Mac OS
- Driver available for Window 98 SE(free download)
KIT
INCLUDES:
- FWBU2EIDE525D-1 enclosure
- AC Power Core (1.8m length)
- Bilingual 9pin -to- Bilingual 9pin Cable (2.0m length)
- 6pin-to-6pin FireWire cable (1.5m length)
- A -to- Mini B 5pin USB 2.0 Cable (1.5m length)
- Installation guide
- 30-DAY WARRANTY
|