A uniquely designed RS232 PCI combination module that supports RS232/422/485 serial signal through a PCI to DB44 cable connection. With DIP switch controls and terminal block connections the combo box supports baud rates up to 921.6Kpbs.
This RS232 PCIe module is a uniquely designed serial expansion box that expands to RS232, RS422, and RS485 serial signals from a PCI card (with optional low profile bracket) and a 3ft. DB44 cable connection.
The RS232 PCIe combo module supports 8 serial ports which can be set in any combinations of RS232, RS422, RS485-2W, or RS485-4W modes. The 8 serial connections include eight DB9 ports or 8 terminal block connections for RS422/485 function. Its 256-byte-FIFO UART based serial ports are fully 16C550 UART compatible with most of the RS232C, RS422 and RS485 devices available from the market.
The RS232 PCIe module box can be wall or Din rail mounted with the included brackets, the module’s serial function for all 8 ports can be DIP switch controlled, DIP switches are located on the bottom plate of the module.
Features
Supports PCI or PCIe with Corresponding PCI and PCIe Host Adapters
Supports RS232 over Standard DB9 male Connectors
Supports 8 RS232/422/485 Combo Serial Ports
256-byte deep FIFO per transmitter and receivers
Supports RS422/485 over 7-pin Terminal Blocks
Supports 4-wire RS422/485 and 2-wire RS485 Modes
Supports RS485 Auto Transceiver Turn Around by Unique Featured ATTATM Hardware
Powered by the DB44 Host cable, no AC Power Adapter Required
Supports Low Profile Form Factor with Optional Low Profile Bracket
Supports Baud Rate up to 921.6Kpbs
Supports Win2000, XP, 2003, 2008, Vista, Win 7, 8 and Linux
Dimensions
Box dimensions: 11.625(L) x 7.500(W) x 2.750(H)
Module box dimensions: 8.812(L) x 3.375(W) x .982(H)