USB 2.0 SATA Hard Drive Adapter Cable

Great addition to anyone who needs to Test SATA or SATA II Hard drives or if you allready have a SATA enclosure and you need to convert SATA Output to USB CHIPSET:NEC-720133, Jmicron-JM20330B2 USB 2.0 Adapter to any Native SATA 3.5\'\' Drive from 80GB up to 500GB. Compatible with Windows ME/2000/XP/2003. MAC OS X.3.4 or higher is supported! Adapter plugs directly to your usb 2.0 port on a windows based computer and provides one SATA port (with short cable) to connect directly into your SATA 3.5\'\' HDD. Uses NEC and Jmicron Chip for COnversion. Real Life Test Results show a 12.9 GB file folder with 237 Files transfered in less than 10 minutes. Tested with WD/Maxtor/Seagate/Hitachi SATA drives. Package includes Adapter cable only, you will need to provide external power to your drive. USB2.0 to serial ATA translation. It includes the NEC USB2.0 IDE bridge & Serial ATA PHY, Link, Transport. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 ,The AUS100 converter supports a SATA 1.5GHz data rate & USB2.0 480MHz data rate . The application layer supports both the ATA register command set and PACKET command set, which could drive SATA Hard Disk. Dimension : 51 * 30 * 17 (mm) Weight : 19g With LED Indicated power Power supply : USB port need power : under 1W Support Win-98se,Win-98me need driver Support Win-2000,Win-xp free driver Easy install & free driver Max speed (Read + Write) : 52M Byte USB2.0 Specification compliant USB2.0 NEC newest chipset install Serial ATA 1.0 Specification compliant Automatic Serial ATA 1.5 Gbps speed negotiation Support USB2.0 plug & play Support Serial ATA hot-plug Ultra low power consumption Work for both AC and DC couple between the transmitter and the receiver Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level

SATA Hard Drive Adapter to USB 2.0 Cable

SATA Disk Slave support Speed :Win-98 .....Read >17 Mbyte , Write >14 Mbyte Speed :Win-2000,xp .Read >27 Mbyte , Write >25 Mbyte @

Item Can be used with ANY SATA Enclosure to get acess to Hard Drive Data Via USB 2.0 Port

Enclosure pictured is not included.