USB Device Server over 10/100/1000 Mbps Ethernet Network TCP/IP
$87.95
Serve up your USB network devices through the NetUSB-100iX4 Ethernet connection. This USB device server has many features, is light weight, and can be wall mounted or on other flat surfaces for 10/100/1000 Mbps Ethernet support.
Run network enabled devices through USB Device Server
The NetUSB-100iX4 is a network-enabled USB Server for connecting USB devices over the 10/100/1000 Mbps Ethernet network running TCP/IP. By adding this USB to Ethernet Server to LAN, you can network-enable the USB device. It breaks the traditional five-meter USB cabling distance limitation. By this implementation, USB devices connected to NetUSB-100iX4 can be made available to remote clients over LAN- without a locally attached host PC.
The NetUSB-100iX4 provides a simple and convenient way to extend a USB device over long distances and allows for sharing that USB device with multiple users over Ethernet Network.
NetUSB-100iX4 Device Server Features
Extends USB cabling distance beyond five meters
Allows USB devices to be used and shared by client PCs over LAN
Supports wide variety of USB devices
Compatible with USB 2.0 specification and backward compatible with USB 1.1
Connects up to 4 devices using an additional USB Hub (not included)
Provides Plug-n-Play and hot-swap functions same as on board USB port
Access and monitor USB devices over a user-friendly application interface
Supports wide input power range: DC9V~DC48V
NetUSB-100iX4 Specifications
The NetUSB-100iX4 USB to Ethernet Server provides:
RJ45 Ethernet to 1 USB 2.0 port
Allows USB Devices to be used and shared by client PC's over LAN
USB 2.0 High Speed Ports up to 480 Mbps speed
Full 500 mA power provided to USB port
Connects up to 4 devices using an additional USB Hub (not included)
Supports wide variety of USB devices
10/100/1000 Mbps Ethernet support
Supports IP addressing: Static and DHCP
LEDs for system/ Ethernet status
Field-upgradeable firmware
Supports “Reset” button for system reset
Supports “Default” button for configuration to default setting
Input power range: DC9V~DC48V
Compatible Windows XP/ 2003 Server/ Vista/ Windows 7/ Windows 8
Regulatory approvals: FCC Class B (DoC) and CE
RoHS compliant
Hardware Restore Factory Default Button located inside the housing:
The NetUSB-100iX4 USB server supports a Hardware Factory Default button to restore the default settings (like IP Address). You will need to open up the case. When the NetUSB-100iTX is powered on, press the factory default push button for 5 seconds. It will restore the default settings for the NetUSB-100iX4 USB Server.
Hardware Reset Button
The NetUSB-100iX4 USB server supports Hardware Reset Button to reset the hardware. When the Hardware Reset Button is pressed for a short duration, it will reset the NetUSB-100iX4 USB server system.