IDE Ultra ATA-100/133 to Serial ATA (SATA) Mini Converter Adapter
IDE Ultra ATA-100/133 to Serial ATA (SATA) Mini Converter Adapter OVERVIEW
Convert High Capacity SATA Hard Drive and SATA Storage Device to operate with IDE Host Controller!
Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk,
DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….)and make them become IDE Device to work with IDE host Controller.
This Bridge Board is a converter solution for the Serial ATA Device. It has a standard 22 pin SATA port
which can interface to a Serial ATA device (hard disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA
(IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a
Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed
and converted to a prallel ATA protocol and sent to the host.
The SATA-to-Ultra ATA/133 Converter Board supports the Serial ATA Generation 1 transfer rate of 1.5 Gb/s
(150 MB/s) on the serial ATA side and is compatible with Ultra ATA-133 on the parallel ATA side.
Mini Converter Adapter FEATURES:
IDE Ultra ATA 100/133 to Serial ATA (SATA) Mini Converter Adapter
- This Bridge board can support HDD larger than 137GB.
- Supports any type of SATA150 Device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, etc.)
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Mini Board size (75mm x 26mm), No space wasted
- Compliant with Serial ATA 1.0a specifications
- Supports Spread Spectrum in receiver
- Compliant with ATA specifications
- Compatible with Ultra ATA 133 / 100 / 66 / 33
- 100% hardware bridge converter to support PC, MAC and Linux environment
- Compatible with Ultra ATA 133 specifications.
- Supports all types of SATA storage devices. (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, etc.)
- Complaint with Serial ATA 1.0 specifications.
- Supports Serial ATA Generation 1 tranfer rate of 1.5Gb/s.
- Y-type Power Cable
- Quick Installation guide
*** SEARCH COOLDRIVES SITE:
*** Can't find that item you're looking for? Please let us know what we should bring in stock.
| FREE HELP FORM
| We are Located in Clearwater Florida 33762 USA. You may use our Web Form for FREE SERVICE as WE DO NOT PROVIDE PHONE SUPPORT. Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help.
Firewire Products by APDrives CoolUSB CoolRAID SATACables SataAdapters CableMAX GearMO SerailStuff OXGear UNITEX SERIALGear SATAPRO SATAGear CoolGearMax SATAVault CoolGear CaseGear KVMGear EXPRESSCARD PCI-E Gear DVIGear USBMax CoolDrive SecureDisk SecureGear CaseGear and Much More.
Note: Assembly of Drive Enclosures requires both mechanical and computer skills THERE IS A 25% RESTOCKING FEE ON ALL RETURNS.
ALL ENCLOSURE SALES ARE FINAL.
Due to the volume of uninformed purchases, enclosures can be returned FOR WARRANTY REPAIR ONLY (NO REFUNDS).
Have Questions? Our Tech Guys Can Help!
Support Center Hours: 11AM EST - 4 PM EST Monday
- Friday Only!
|Conditions of Use Security Info Shipping Info Customer Care
Copyright @ 1997-2009 CoolDrives and its licensors. All Rights Reserved.
CABLEO / QCUSA. Part of COOLDrives Family
All Rights Reserved.
Fax: (727) 209-1302
E-mail is the recommended and least costly (no long distance charges) method of contacting us.
Just in case your question requires a voice call follow up, please include your daytime phone number.
Voice mail messages: To call our voice mail center, dial 1 (727) 209-1300.
Please include your e-mail address as most questions can be answered more quickly and completely with an e-mail response
Item Appearance will Vary, Specifications are subject to change without prior Notice!