Dual SATA Hard Drive Hardware RAID 1 or RAID 0 up to 1,000GB

USB 2 SATA HARDWARE RAID SYSTEM

This item is New and/Or Used and Has 30-Day Warranty!

Sold-AS-IS!

SATAVault is the ideal storage solution to safeguard digital photo files downloaded from flash memory cards. SATAVault offers the ultimate in peace of mind by simultaneously writing to two independent hard disk drives providing instant back up of the images as you save them.

SATA Raid System, Mini SATA Raid, Hardware Raid System for Two SATA Hard Drives Raid Level 1 and Level 0

eSATA and USB 2.0 interface Accepts SATA or SATA II hard drives 3.5"

eSATA and USB 2.0 Hardware RAID System

SATAVault™ SV Series Mini Raid makes adding RAID storage to any computers easy and affordable.

Need a Smaller, Better, More cost-effective way to store and manage your ever-growing masses of data? Free up valuable primary storage space for your most critical data applications.

TRUE HARDWARE SATA RAID SYSTEM

Complies with RAID 1 specification, assuring that two hard drives are always in mirror mode during normal operation (user selectable).

Complies with RAID 0 specification for high-throughput disk operations (user selectable).

No device driver is required for most modern operating systems.

Plug and Play design for direct connection to SATA host interface and SATA drives. Supports all 7200 and 10,000 RPM drives.

Supports hot swap and Auto-rebuild on most supported operating systems.

Easy to Read LCD panel:

To simplify the RAID status monitoring Uses hardware monitor to monitor HDD status, Temperature and Fan activity Displays warning message on LCD screen when respective disk encounters problem

displays system status, disk operations, and temperature.

LED indicators indicate disk read and write status.

Audible alarm warns of impending disk and cooling problems.

Provides One RS-232 Port for RAID Management (windows only)

Valuable Data is protected against a hard drive failure when the system is configured for RAID level 1 (RAID 1)

By seamlessly storing copies of data on two indentical sata hard drives. Any hard drive can fail without data loss or system downtime. Our Raid 1 System is capable of rebuilding while you are working. When the failed drive is removed and is replaced our Auto rebuild process starts, within a few hours data fault tolerance is easily restored. Ultra fast SATAVault™ raid system can re-build Raid 1 array at 90+GB/hour.

Model No.	SV-2RSA1
Host Interface	SATA(150 MB/Sec) + USB2.0(56 MB/Sec)
Drive Interface	3.5¡¨ SATA I 1.5GHz / SATA II 3.0GHz
Hard Drive	2
Microprocessor	8032 Microprocessor RAID ASIC
RAID Level	0, 1
Largest Capacity	RAID 1 Up to 750GB, RAID 0 Up to 1000GB
Support Hot-Swap	2 Hot-Swap drive trays (with lock mechanism)
Support Auto Rebuilding	Yes
Cooling Fan	3cm Ball Bearing Fan + 4cm Ball Bearing Fan
Power Supply	90-240V, 70 Watts
Dimension	122Wx203Lx102H mm
Weight	1.67 Kg
Case Material	Aluminum Case
LCD Display	LCD Control Display Panel for setup and configuration
System Management	RAID GUIDE GUI Monitor Software and Notify by E-mail as Event Happened
O.S. Independent	Mac 10.26, or later Windows 2000, XP
Safety Guarantee	CE/FCC
Warranty	NO WARRRANTY, NO REFUNDS, NO RETURNS

*Specifications subject to change without notice.

SV-2RSA1

SV-2RSA1 x 1

Removable Tray x 2

RAIDGuide CD x 1

Accessories bag x 1

Power cord x 1

RS232 cable x 1

eSATA cable x 1

USB cable x 1

As with All Raid 1 Systems this enclosure requires identical hard drives (make/model/capacity).

Express USER GUIDE

Full USER GUIDE

Easy Connectivity to USB 2.0 or eSATA Capable Computers picture of sata raid system hardware raid with eSATA and usb port

Very Small and Modern ALuminum Design picture of sata raid system hardware raid with eSATA and usb port

SATAVault™ by CoolGear™ SV Series is a Mini External Hardware RAID solution which provides with RAID 0, 1 function and user friendly of operation feature.

The SV-2RSA1 offers 2 bays of SATA hard drives.

Hardware RAID Design, supports RAID 0,1

Host Interface: SATA 1.5 GHz (e-SATA port) & USB 2.0 Combo

Drive Interface: 2x 3.5" SATA 1.5 GHz

Hot Swappable Tray Module Design compatible with ALL Brands of SATA I or SATA II Hard Drives

(RAID 1) Data Auto-Rebuilding

LCD Display

Hard Disk, Fan and Temperature failure detectors to ensure system stability Windows-based GUI software

Standard Interface, No extra driver required

This RAID enclosure will accept any SATA or SATA II Hard Drive from 80B up to 750GB each. (some new SATA II drives will require you to set the jumper to sata I speed for compatibility reasons)

picture of sata raid system hardware raid with eSATA and usb port

Should a hard drive fail, RAID 1 can provide real-time, uninterrupted data recovery.

SATAVault SV-2RSA1 Hardware RAID 0/1 System for SATA or SATA II Drives

System Architecture

8032 ASIC RAID Microporcessor
2 channel SATA controller
NVRAM for RAID configuration & transaction log (WIN)

RAID Features

Supports RAID level 0 or 1 (selectable)
Hot swap without taking the system down (in RAID 1 Config)
Instant availability and background initialization
Automatic drive insertion, removal detection and rebuilding.

Disk Bus Interface

3.5" SATA or SATA II
hard drives
2 channel operation
2 hot-swap drive trays
48-bit LBA support allows disk exceeding 137GB, supporting up to 500GB drives.

Hardware Raid Interface

eSATA ~Transfer rate up to 150MB/sec
USB2.0 Transfer rate up to ~56MB/sec

Monitors & Indicators

Push Buttons and LCD Display Panel for setup, alarm mute and configuration
2 drive LED indicators and 1 LCD LED indicators
Environment and drive failure indication through LCD, LED and alarm buzzer
Built-in alarm
RAID Management (WIN)
Web browser-based RAID management via HTTP PROXY through RS-232 (WIN)
Firmware-embedded manager via RS-232 port (WIN).

More SATA RAID Stuff Here

RAID 0 RAID 1 RAID 10 SATA RAID FIREWIRE RAID USB RAID SATA RAID 5 More SATA RAID Systems (Click Here)

** PLEASE NOTE: SOME NEW SATA II Drives Will REQUIRE to be Set to SATA I Speed Via Jumper for Compatibility Reasons! sata raid hard drive compatibility list


Spare Hard Drive Screws and HDD Tray Keys for SATAVault Enclosures Regular price: $2.99 Sale price:		Spare Aluminum Tray for SATAVault Enclosures I Series Regular price: $34.98 Sale price:

*** SEARCH COOLDRIVES SITE:

*** Can't find that item you're looking for? Please let us know what we should bring in stock.

.

FREE HELP FORM

We are Located in Clearwater Florida 33762 USA. You may use our Web Form for FREE SERVICE as WE DO NOT PROVIDE PHONE SUPPORT. Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help.
Name (*Required)

Email (*Required)

Phone: (*Required)

Order Number / Item Number

Subject / Part# / Problem Title:

Description
Please be as detailed as possible with your description. The more complete your information is the faster we can return an answer.
QUESTION ON ITEM FROM COOLDRIVES.com:

Priority

Emergency?

Question is about?

.

Why buy from CoolDrives.com ?

***** Top Rated Yahoo Store, Quality Innovative Products , Great Prices, Friendly E-Mail Service, Next-Day shipping*, Low shipping rates, Established 1997, Security and privacy, Fair Return Policy

Before purchasing any enclosure please verify any compatibility issues either with existing hardware or software as ALL ENCLOSURE SALES ARE FINAL. Due to the volume of uninformed purchases, enclosures can be returned FOR WARRANTY REPAIR ONLY.

When Selecting/Purchasing empty enclosures specific hard drive power consumption calculation is left to the end user, improper power calculation by the user can result in drive and or enclosure faliure and this is NOT Covered Under Warranty.

*** Please use our Pre-Sales support online-form for any questions concerning enclosures.

Firewire Products by APDrives CoolUSB CoolRAID SATACables SataAdapters CableMAX GearMO SerailStuff OXGear UNITEX SERIALGear SATAPRO SATAGear CoolGearMax SATAVault CoolGear CaseGear KVMGear EXPRESSCARD PCI-E Gear DVIGear USBMax CoolDrive SecureDisk SecureGear CaseGear and Much More.
Note: Assembly of Drive Enclosures requires both mechanical and computer skills THERE IS A 25% RESTOCKING FEE ON ALL RETURNS.
ALL ENCLOSURE SALES ARE FINAL.
Due to the volume of uninformed purchases, enclosures can be returned FOR WARRANTY REPAIR ONLY (NO REFUNDS).

Have Questions? Our Tech Guys Can Help!
Support Center Hours: 11AM EST - 4 PM EST Monday - Friday Only!

Conditions of Us e Security I nfo Shipping Info Customer Care
Copyright @ 1997-2009 CoolDrives and its licensors. All Rights Reserved.

CABLEO / QCUSA. Part of COOLDrives Family All Rights Reserved.
Fax: (727) 209-1302

E-mail is the recommended and least costly (no long distance charges) method of contacting us.

Just in case your question requires a voice call follow up, please include your daytime phone number.

Voice mail messages: To call our voice mail center, dial 1 (727) 209-1300.

Please include your e-mail address as most questions can be answered more quickly and completely with an e-mail response

Secure Shopping

100% Guarantee

Returns Made Easy

Item Appearance will Vary, Specifications are subject to change without prior Notice!