VS-NetCom 823RM WLAN    

Overview	VS NetCom 823RM WLAN is an industrial-strength network-based serial device server for connecting four RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to a network running TCP/IP. This network may be based on 10/100Mbps Ethernet or Wireless LAN as of IEEE 802.11b/g. VS NetCom 823RM WLAN provides completely secured communication for configuration and to the attached serial device. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 823RM WLAN can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation.
Applications	Industrial / Factory / Laboratory automation SCADA system Automatic warehouse control system Building automation system Wafer fabrication system Self-service banking system Retail system Other remote and distributed serial devices control
Hardware
Processor	ARM 9 166 MHz
I/O controller	16C950 or compatible
Memory	16MB SDRAM, 2 MB Flash
Connector type	SMA-Reverse for WLAN antenna, RJ45 for Ethernet, DSUB 9 male for serial Port
Interface
WLAN interface	Wireless LAN IEEE 802.11b/g, max. 54 Mb/s Encryption WPA-PSK/TKIP, WEP-128, WEP-64 Infrastructure mode (uses an Access Point) Ad-hoc mode (direct connection to a PC/Laptop)
Ethernet interface	Auto-detecting 10BaseT/100BaseTx
Protocols	TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS
Serial interface	RS232/422/485 selected by software or DIP-switch
No. of port	8, Speed up to 1.843 Mbps
Available Modes	RS232 full duplex RS422 full duplex RS485 4 wire, full duplex RS485 2 wire, half duplex, with echo RS485 2 wire, half duplex, without echo
Signals	RS232 TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422 Tx+/-, Rx+/-, GND RS485 2 wire Data+/-, GND RS485 4 wire Tx+/-, Rx+/-, GND
RS485 Data control	Controlled by ART (Automatic Receive Transmit control) or RTS
Performance
Speed	RS232: up to 921.6 kbps RS422/485: up to 1.843Mbps
Parity	None, even, odd, space, mark
Data bits	5, 6, 7, 8
Stop bits	1, 1.5, 2
IRQ	None
I/O address	None
Operating Modes
Driver mode	VScom Driver for Windows NT 4.0, 2000, XP and 2003 Driver Mode creates virtual Com port.
TCP Raw Server	Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client	Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings	Special settings for user-defined modes
UDP Mode	Raw data transfer by UDP. The NetCom is client and server at the same time. Timeout functionality, maximum packet size and a configurable trigger string define the packets of incoming data to send over UDP
Null Modem Tunnel	Connecting two NetCom used as virtual null modem cable.
IP Modem	The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers. Windows "INF"-Driver provided for installation.
Print Server	The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
Power and Environment
Power requirements	100 - 240V AC 47-63 Hz, 25VA
Dimension	258×149×45 mm³ (W×L×H) 278×155×46 mm³ with DB9 connectors and DIN-RAIL ears 19" 1HU Rackmount
Operating Temp	0°C - 55°C
Storage Temp	-20°C - 85°C
Case	SECC sheet metal (1mm)
Weight	1.9kg
Special Features
Installation	Configuration utility automaticly finds NetCom devices in the network
Operating mode	Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automaticly which mode should be used.
Configuration	Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP	special VScom MIB included
ART	Automatic Receive Transmit control for RS485
DNS	Domain Name Server support
Serial interface	Serial Interface configurable with DIP switch and by software
Firewall	Special precautions for Firewall environments
Firmware	Firmware update over WEB Browser, Telnet, ComPort
LEDs	LEDs for Power, serial Tx, Rx, Ethernet Link, Speed, WLAN
Security
Password access	Every capabilities of configuration use the same password including SNMP V3
Secure communication	OpenVPN™ tunnel provides security on Ethernet and Wireless networks. The tunnel protects the configuration as well as all serial data. It is also usable across the Internet. Strong encryption by AES up to 256 bit keys.
WEP	Encryption with 64 and 128 bit for compatibility in simple installations
WPA	Modern Wireless protection by WPA-PSK/TKIP
Ordering Information
Product Name	VS NetCom 823RM WLAN
Packing list	VS NetCom 823RM WLAN WLAN antenna Power cord 19" mounting kit CD-ROM with Driver and configuration software Printed Quick Installation Guide