Skip to Store Area:

CoolDrives

Search Site

CoolDrives Store | My Account | Login | Checkout

FireWire 800 (IEEE 1394b) to IDE (HDD/ATA/ATAPI) RAID SPAN bridge board featuring initio inic-2430L FireWire 800

Email to a Friend

Be the first to review this product

SKU: FWB-IDE02+

Availability: Out of stock.

$10.00

Quick Overview

FireWire 800 (IEEE 1394b) to IDE (HDD/ATA/ATAPI) RAID SPAN bridge board featuring initio inic-2430L FireWire 800


The Fastest FIREWIRE 800 to IDE BridgeBoard, Using INITIO 2430L Chip. Faster than Any OXFORD Chip!
This Item Has Been Replaced By New Model, Please See Link

FWB-IDE02 is ideally suited for tailgate interface applications for ATA hard disk drive.  FWB-IDE02 has two IDE channels. Each IDE channel allows ATA drives (Master and Slave) to be connected to FireWire 800 (IEEE 1394b) serial bus in a plug-and-play fashion. 

FWB-IDE02 provides RAID (Span) function.  FWB-IDE02 is aimed at higher-speed multimedia file storage application.  FWB-IDE02 provides the perfect solution for video or image file storage and transferring of data between computers using ATA devices.

FEATURES

  • FireWire 800 (IEEE 1394b) to ATA Bridge Board:
    - ATA Interface: Male IDC 2X20 Connector X 2
    - Number of ports: External X 2 (Biligual-9pin) and Internal X 1 (Biligual-9pin)
    - 1394b PHY: Ti\'s TSB81BA3
    - 1394 Bus Transfer Rate: 100/200/400/800 Mbps
    - FireWire (IEEE-1394) to ATA Native Bridge Controller: initio inic-2430L
  • Complies with T13\'s ATA/ATAPI-7 Draft Specification:
    - PIO Mode 0-4
    - DMA Mode 0-2
    - Ultra DMA Mode 2, 4, 5, 6
    - Supports 48-bit addressing for large hard drives (>128GB).
  • Physical Dimensions: 3.33" x 2.00" (8.45cm x 5.00cm)
  • Fit to most standard SCSI enclosure
    (SCSI I 50pin Connector Form Factor)

APPLICATION
FWB-IDE02 aims at the higher-speed multimedia file storages.

BENEFITS
This allows peripheral vendors a unique opportunity to continue the ATA economies of scale while presenting FWB-IDE02 into the rapidly expanding FireWire 800 (IEEE 1394b) markets.

KIT INCLUDES

  • FWB-IDEI02 Bridge Board
  • Two Ultra DMA100 Cable 12 inch for two devices (Master & Slave)
  • Biligual-to-Biligual FireWire 800 Cable 2.0m length
  • Y-Shape DC Power Cable (Red, Black, Black, Yellow)
One Board for up to 4-IDE Devices, Hard Drives and/or Optical Drives (CD/CD-ROM/DVD/ATA)
  • PLEASE NOTE: INITIO DOES NOT PROVIDE A MACINTOSH VERSION RAID CONFIGURATION UTILITY FOR THIS DEVICE , STANDARD SETTINGS ARE NO RAID.
  • ALL DRIVES WILL SHOW INDIVIDUALLY. MAKE SURE TO FOLLOW PROPER ATA/IDE SPECIFICATIONS WHEN SETTING NEW DRIVES. Master Drive must be at the end of the IDE cable, Slave jumpered drive must be at center IDE connector. This device USES Special IDE cables, you cannot extend and/or replace these with any other type of IDE cable!
  • If you need to make changes to the configurations on this board you will need to use a PC with Windows 2000 or XP and obtain Utility from our tech support site. Or you may just tell us how you wish to set this up and we will program board before shipping!
  • Please Note: IOI Technology Is Going Out Of Business, There is NO WARRANTY ON IOI PRODUCTS!
  • SKU FWB-IDE02+

    Customer Reviews

    No Reviews yet. Why don't you leave one? Use the link above labeled "Be the first to review this product" to be taken to the right page.