Manufacturer: CableMAX Will work as standard RS232 port or with 5V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB Can be installed in Low Profile or Standard Height chassis with provided brackets
Add 2 Ports RS232 PCI card to Transmit and Receive Data at 920Kbps & 128-byte deep FIFO to your System
One RS232 DB9 and one RS232 10pin RJ45 serial ports on board
Include one 10pin RJ45 ¨C DB9M Bridge cable
128-byte deep FIFO per transmitter and receiver
Supports baud rates up to 920Kbps
32 bit PCI V3.0
Low Profile PCI Form Factor
5VDC Power Supply on DB9 Port for POS Applications FEATURES 1. PCI Compliant with PCI Specification, revision 3.0 and PCI Power Management Specification 1.1 32 bit/33MHz fully compliant PCI host interface 3.3V / 5V Operation Low Profile PCI Form Factor Provides Low Profile & Regular size two brackets 2. RS232 (UART) Serial Port Two 16C950 High performance UART channels 128-byte deep FIFO per transmitter and receiver Superset and backward compatible to 16C550, 16C650, 16C750 and 16C850 Individually enable / disable 5V DC output in each serial Port One RS232 DB9 and one RS232 10pin RJ45 serial ports on board One 10pin RJ45 ¨C DB9M Bridge cable to have second DB9M port Supports data transfer rate up to 920 Kbps 128 Rx interrupt thresholds 128 Tx interrupt thresholds 128 flow control thresholds For Windows 98/ME/2000/XP, Linux and DOS PCI Serial Dual RS-232 2X DB-9 Low Profile PCI or Standard PCI Bracket (both are included) uses the following DB9 Male RS-232 Pinout:
Pin 1 DCD [Data Carrier Detect]
Pin 2 RXD [Receive Data]
Pin 3 TXD [Transmit Data]
Pin 4 DTR [Data Terminal Ready]
Pin 5 GND [Ground]
Pin 6 DSR [Data Set Ready]
Pin 7 RTS [Request To Send]
Pin 8 CTS [Clear To Send]
Pin 9 RI [Ring Indicator]
Dual Port Low-Profile PCI Serial Card ... serial printers, handhelds and PDAs, mice and trackballs, keypads, serial POS devices
, 
, 
, 
, 