U2-SATA11 is an USB 2.0 to SATA bridge board. It has an USB high-speed device port and a SATA 1.5G host port. It received standard Mass Storage Device Class (MSDC) SCSI command from USB host and translate into ATA/ATAPI command to SATA device. The maximum throughput can goes up to 30MB/sec.
U2-SATA11 is an USB 2.0 to SATA bridge board. It has an USB high-speed device port and a SATA 1.5G host port. It received standard Mass Storage Device Class (MSDC) SCSI command from USB host and translate into ATA/ATAPI command to SATA device. The maximum throughput can goes up to 30MB/sec.
Technical Specifications
USB to SATA Bridge Board
USB 2.0:
Compliant with USB 2.0 specifications and pass USB certification.
Support USB high speed (480Mbps) and full speed transfer rate (12Mbps).
Support Mass Storage Device Class bulk only transfer.
Support USB vendor command (Control Endpoint) and SCSI vendor command.
Support USB host controller for UHCI, OHCI, EHCI mode.
Serial ATA:
Compliant with Serial-ATA 1.0A specifications
Support Serial-ATA generation 1 transfer rate of 1.5Gb/s
Support spread spectrum in receiver
Support Serial-ATA power saving mode: Partial and Slumber mode.
Support PIO, MDMA and UDMA mode data transfer.
Provide pin header for Power and SATA Activity Indicator LEDs