USB C to RS-232 6FT Serial Adapter Black w/FTDI Chipset DB9 male
$27.45
USB C to RS232 Adapter - 6ft. Cable: The USBGear 6ft. USB C to RS-232 Serial Adapter features a new black ultra sleek and powerful design with Hi-Speed FTDI Chipset and allows unusual speed settings of up to 500.000bps. Comes with software drivers and manual.
Availability:
In stock
SKU
USBG-232MM-C
Use new laptop computer USB technology to synchronize your new serial device or device currently using a serial port with this new USB C to RS-232 Serial Adapter. This USBG-232MM-C serial adapter adds a serial port to laptop, or supporting tablet PC via a hot plug compatible USB C connector.
Using an existing USB Type-C Port, the adapter can be utilized to work with your legacy serial connections. It’s great for newer Laptop and PC technologies with no serial port connections that incorporate USB Type-C ports.
The combination of RS-232 Serial Adapter communication protocol with USB C technology allows further use of existing devices through a universal host connection. The high-speed RS-232 serial port with 128 byte FIFO allows for high-speed communication, even in heavily loaded systems.
This serial adapter also allows unusual speed settings of up to 500.000bps. The USBG-232MM-C USB C to RS-232 Serial Adapter also features TxD and RxD LEDs that are located on the DB-9 Male end of the cable.
Additional Features:
- Adds one RS-232 serial port by connecting to a USB C port.
- Compact size cable type converter with cable length of 6 feet.
- Installed as standard Windows COM port through your laptop or Type-C enabled device.
- Full RS-232 modem control signals and hardware/software flow control
- RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
- High speed serial port with the baud rate up to 921.6K bps
- Non-standard baudrates supported
- LED status indicators for TxD and RxD for easy port monitoring and diagnostic
- Serial port protected with surge protection of 10KV
- Powered by USB port, no external power adapter required
- Easy plug and play installation and RS-232 device connection
- Uses FTDI Chipset FT231XQ
- COM port number assigned can be changed to any COM port number required
- Works with USB 1.1 & 2.0 host port
- Windows XP, Vista, Windows 7, 8, and Windows 10
- Linux and Mac OS 10.X
- Magellan Sportrak GPS
- Garmin GPS III Plus
- Garmin eTrex Legend
- Garmin 76S GPS
- Garmin Rino 120
- Garmin Etrex
- Garmin GPS V
- Peets weather station
- Sky Caddie
- SkyCaddie SG2 Golf GPS
- Humminbird 767
- Megellan MAP330
- Oregon Scientific WMR-968
- La Crosse WS-3610
- Davis Vantage Pro II weather station
- Yaseu FT-950 Amateur Radio
- Kenwood TM-D710 ham radio
- TenTec RX320 shortwave radio receiver
- Kenwood TM-D710 dual band Amateur radio
- Cisco 871 Cisco 2900/3900 XL, Cisco ASA5505, Cisco 678 DSL, Cisco 2621XM
- US Robotics Courier dual standard V.34
- Zoom 56k external fax modem
- Bernina 180 embroidery machine
- Innova 3140 / 3160 OBD2
- Equus 3130 Innova Diagnostic Code Scanner
- Autel MaxiDAS
- TS-60 Morningstar Solar Controller
- Celestron 5SE Telescope
- Celestron CGEM astronomy tracking mount
- Uniden BCD396XT programmable radio
- Uniden 780XLT scanner
- Uniden Bearcat BC346XT scanner
- Strippit HECC80-3 CNC
- Anthem MRX 300 A/V receiver
- Anthem MRX 500 receiver
- NuVo music system
- Brother wire EDM machine
- Graphtec plotter
- Stentura 200SRT
- Stentura 400SRT
- Stentura 500
- Stentura 6000
- Stentura 6000LX
- Stentura 8000
- Stentura 8000LX
- WAVE
- DIAMANTE
| SKU | USBG-232MM-C |
|---|---|
| UPC | 736983909022 |
| Color | Black |
| Connector(s) | DB-9, USB Type-C |
| Warranty | One Year |
| Compatibility | All Operating Systems |
| Material | Plastic |
| DB9 Gender | Male (pins) |
| DB9 Screws or Nuts | Hex Nuts |