Skip to Store Area:

CoolDrives

Search Site

CoolDrives Store | My Account | Login | Checkout

3.5" USB2.0 External Enclosure for IDE Drives With Backup Button

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

3.5" USB2.0 External Enclosure for IDE Drives With Backup Button

Email to a Friend

Be the first to review this product

SKU: USBG-UIDE-2AB

Availability: Out of stock.

Regular Price: $49.98

Special Price: $29.98

Quick Overview

3.5" USB2.0 External Enclosure for IDE Drives With Backup Button


FNet PCClone EX Is included with this Hardware Back-up Button Software Combo Drive Enclosure Kit! The included PC Clone EX software installed in less than a minute and was very easy to navigate and use with a quick launch tab consisting of choices for “system” or “files” backup. Switch to the system backup tab and it identifies your systems bus type, partitions and type, model number, total and free space available. Choose your system drive type, click on the “backup” button, check the “verify data after backup” and you’re ready to go. Move to the files tab, identify the files you desire for backup or use the “restore” function button. Now, go to the files manager tab and view all of the data in both identified drives and exit. More magic is in store with programmable “hot keys” under the setup tab allowing you to choose keys for system and files backup along with choosing the compression ratio, select “add files to existing backup” or “discard and replace existing backup”. You may also choose from the files or system backup double confirm and have the software load automatically on Windows™ startup. Just one Touch Backup data Suitable for 3.5" IDE HDD Support USB2.0 with data transfer rate up to 480Mbps Plug & Play and Hot Plug Come with stand,allows for heat dissipation Stylish aluminum encosure in silver or black color Durable aluminum shell with trim

Worlds First Mini Size IDE TRUE BACK-UP Software Hardware Combination for IDE ATA-100/133 Drives

USB Hard Drive Case for Windows Users

The new generation USB2.0 BACK-UP READY HDD Case, a slim, stylish and powerful aluminum enclosure for your 3.5¨ IDE (PATA) hard drive. Features fanless design and passive cooling, ideal for multi-media users and quiet working environments.
  • Supports Plug and Play / Hot-Plug
  • There is NO WAY you will find a Smaller Drive Enclosure, Enywhere!
  • Dimension 175(L) x 118(W) x 30(H)mm Native SATA 3.5 inch Drive to USB 2.0 Solution, Slim Compact Aluminum Enclosure. Tested with All IDE Drives by Maxtor WesternDigital IBM Hitachi Samsung Seagate Etc. hard drives speed ATA-66/100/133 from 80GB up to 500GB Capacity! Convert any IDE drive into a Cool Slim Portable USB 2.0 BACK-UP System with best chipset performance! IDE usb 2 hard drive enclosure IDE back up drive enclosure with direct connect
  • Chipset: ITE BACK-UP BUTTON(Fast USB 2.0 Solution over 30MB/s Transfer) usb to IDE enclosure with BACK UP Specifications:
  • Suitable for Most NEW ATA-66/100/133 hard disk type:
  • 3.5" IDE ATA HDD
  • Interface:
  • USB2.0
  • Power supply:
  • Adapter
  • Adapter voltage input:
  • AC 100~240V, 50~60Hz
  • Adapter voltage output:
  • DC 5V/12V
  • LED display:
  • Power on"(green) and "HDD"(Red)
  • Material:
  • Aluminum
  • USB2.0 Cable 90cm

    BACK-UP Hardware-Software Combination via USB 2.0

    System Requirements: Windows 2000, 2003 or XP Installation: 1.Remove two screws in back and pull out the back part 2.Plug the side case in HDD side 3.Plug the IDE 40-Pin Cable and 4-Pin Molex Power cable in the seat of the HDD back 4.Carefully position the 3.5" HDD & the back part PCB inside the aluminum case 5.Fix the screws tightly 6.Connect the power cable and USB2.0 cable to the external box and PC USB 2.0 back up aluminum slim enclosure for windows
  • SKU USBG-UIDE-2AB

    Customer Reviews

    No Reviews yet. Why don't you leave one? Use the link above labeled "Be the first to review this product" to be taken to the right page.